5 People You Should Be Getting To Know In The Repairs To Upvc Windows Industry

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they don't get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will save you from unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and even be fatal. It is essential to ensure that your windows are in good shape.

For single pane windows it is fairly easy to replace them, and the new window is usually able to fit into the frame of the previous one easily. If you have double-paned windows which are held together by internal beading, it is more difficult to remove and replace the old panes. In this instance, you will need to find some plastic spacers that assist the new pane to fit perfectly into the window frame.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the glass, so that any fragments of glass fall onto the fabric instead of onto the floor where they can be trodden under and cause further damage.

Once the glass has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop water and drafts from entering the home until a professional can come out and repair the window. This will also act as a barrier that will prevent any intruders to gain access into your home. If the distance between the door and the window is significant, you may want to use a security screen that also has a window.  window repairs  will provide the best of both.

2. Sagging

uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows made of sash. In time, they could be affected by a variety of issues that include sliding. A sagging uPVC window could cause issues with light, draughts and even security. It's important to take action when you discover that your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window that is sagging. To accomplish this, you'll need open the window so that you can access the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, close your window and verify the fitting. If you're satisfied with the fit of your window, you can tighten screws to secure them in the right position.

If you can't reposition the hinges, you may require replacing the seal. As time passes, rubber seals lose their elasticity and become dry which causes them to loosen. It is crucial to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles can also become loose. This is typically caused by screws that have loosened over time, but it could be due to the handle mechanism wearing out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need close your window and do an experiment fit. The corner joints of the sash must be aligned with the casing joint. If it isn't, you can use a screwdriver to loosen the handle and then reverse the mechanism back into its original position.

3. Water Leaks

If you awake to wet floors and damp walls every time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is damaged or not present.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the problem the caulking that was used up may need to be removed before a new layer is applied. When it is time to uPVC repair, you should avoid over-caulking. This can make your window harder to clean and lower its energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious cases you might have to consider replacing the window.

Moldy sills and rotten ones are other signs of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to keep in mind that if the leakage is coming from between the glass in your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and blow open with a breeze It could be hinges at the fault. These are easily repaired by any skilled DIYer and can be completed in a matter of minutes.

Like all mechanical parts hinges are prone to wear out over time. It is very easy to change the hinges on a window, but it's simpler if you have someone to help hold the frame.

Check that the uPVC hinges are open and closed in the correct direction. You can do this by looking for the arrow on each hinge. This indicates the direction in which the window should open.

Faulty window hinges could be the result of incorrectly opening the window a certain way or by poor installation at the factory. Sending us a picture via our website is often enough to solve the issue. We are more than happy to give advice.

It is also crucial to ensure that the hinges are lubricated on a regular basis. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window to open and close more easily. It can also lower the chance of windows getting stuck and stop corrosion. It is recommended to do this at least once a year. WD40 and other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. The hinges, also due to wear and tear can become misaligned, this can cause gaps to develop where the sash meets the frame. They can be fixed by giving them a thorough clean, however if they are beyond repair it may be necessary to get them re-aligned or replaced. Second, the interlock can be disaligned. This is located on the hinge's side and could require to be cleaned. In some cases it might be necessary to replace these.

The next most common reason for draughts is window seals. They can become worn down or damaged over time, and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures and again will reduce the possibility of draughts.

Another method of reducing draughts effectively is by using a Draught-exclusion device. These are typically fabric tubes filled with a filler, which can be placed over your window sill. They can keep your home warm by blocking cold air.

Your windows made of upvc will remain a great source of insulation and security to your home with a little regular maintenance and repairs. It is crucial to recognize that all windows have a life span and eventually, they will reach the point when it's more economical to replace them than fix them. So, if you're experiencing problems with your upvc windows, it is recommended to seek help from a professional immediately.